Product Description
14.4w LED Strip
Lead Time
These items will be available now.
Please refer to a Mirabella Retail consultant for information.
Contact Number: 03 9387 6777
Email: brunswick@mirabella.com.au
14.4w LED Strip
The 14.4w LED Strip series have the following features;
- Power: 14.4w per metre
- Beam Angle 120°
- Output: 1600 – 1660 lumen
- LED: LM-80 tested
- Voltage: 12v DC
- LED Qty per metre: 60
- CRI: 80+
- Dimmable: Yes
- Cuttable Length: 50mm
- CE Certified
- 5 years Warranty
- Measurement: 10mm
- 5 metres maximum length
- Comes with a 2m 12v lead cable
- Peel & Stick backing
The 14.4w LED Strip series is available in a range of different colour combinations & IP ratings including;
- Colour Temperature: Cool White (5000k) – IP20 & IP67
- Colour Temperature: Warm White (2700k) – IP20 & IP67
Click on the colour options below to view the different colour variations.
Step 1.Prepare Surface
The surface must be clean. When cleaning the surface please use a micro-fibre cloth with no chemicals.
Step 2. Testing
Test strip on drivers and control components before installation. If strip malfunctions or wrong colour found, please contact Mirabella International.
Step 3. Cutting of Strip.
If you require a particular length, you may need to cut the strip. All strips have cutting interval marked, usually every third LED.
Step 4. Installation
Remove the strip from its packaging. Remove the backing of the LED strip to expose a sticky backing.
Please Note: the sticking backing acts similar to a double sided tape, as this acts for initial placement. Use Silicone or suitable adhesive for permanent placing only.
Starting at the beginning of the strip stick the LED strip to the surface. As you press the strip softly, make sure it is straight. Do not push hard on the yellow diode, as it may cause the strip to malfunction. Mirabella requires the strip to be mounted on to a channel or heat dissipating surface such as aluminium.
Step 5. Connection
Once the strip is installed, the LED driver can be connected to the strip.
Please Note: The LED driver wattage needs to be carefully selected as you may over load the driver causing the strip and driver to malfunction.
The driver should be no further than 5 metres from the start of the strip.
ONLY CLEAN THE LED STRIP WITH A DAMP CLOTH. DO NOT USE CLEANING CHEMICALS. MAKE SURE POWER IS SWITCHED OFF.
Mirabella International Pty Ltd
Commercial & Retail Store
Address: 145 Lygon Street, East Brunswick, Victoria, Australia, 3057
Tel: +613 9387 6777
Fax: +613 9387 2711
Email: customerservice@mirabella.com.au
Related Products
-
9.6w LED Strip
The 9.6w LED Strip series have the following features;
- Power: 9.6w per metre
- Beam Angle 120°
- Output: 840 – 960 lumen
- LED: LM-80 tested
- Voltage: 12v DC
- LED Qty per metre: 120
- CRI: 80+
- Dimmable: Yes
- Cuttable Length: 25mm
- CE Certified
- 5 years Warranty
- Measurement: 8mm
- 5 metres maximum length
- Comes with a 2m 12v lead cable
- Peel & Stick backing
The 9.6w LED Strip series is available in a range of different colour combinations & IP ratings including;
- Colour Temperature: Cool White (5000k) – IP20 & IP67
- Colour Temperature: Warm White (2700k) – IP20 & IP67
Click on the colour options below to view the different colour variations.
-
4.8w LED Strip
The 4.8w LED Strip series have the following features;
- Power: 4.8w per metre
- Beam Angle 120°
- Output: 420 – 480 lumen
- LED: LM-80 tested
- Voltage: 12v DC
- LED Qty per metre: 60
- CRI: 80+
- Dimmable: Yes
- Cuttable Length: 50mm
- CE Certified
- 5 years Warranty
- Measurement: 8mm
- 5 metres maximum length
- Comes with a 2m 12v lead cable
- Peel & Stick backing
The 4.8w LED Strip series is available in a range of different colour combinations & IP ratings including;
- Colour Temperature: Cool White (5000k) – IP20 & IP65
- Colour Temperature: Warm White (3000k) – IP20 & IP67
Click on the colour options below to view the different colour variations.
-
23w LED Strip
The 23w LED Strip series have the following features;
- Power: 23w per metre
- Beam Angle 120°
- Output: 3198 – 3517 lumen
- LED: LM-80 tested
- Voltage: 24v DC
- LED Qty per metre: 128
- CRI: 80+
- Dimmable: Yes
- Cuttable Length: 62.5mm
- CE Certified
- 5 years Warranty
- Measurement: 10mm
- 5 metres maximum length
- Comes with a 2m 12v lead cable
- Peel & Stick backing
The 14.4w LED Strip series is available in a range of different colour combinations & IP ratings including;
- Colour Temperature: Cool White (5000k) – IP20 & IP67
- Colour Temperature: Warm White (2700k) – IP20 & IP67
Click on the colour options below to view the different colour variations.